fbpx
 

Developing One-Arm Strength with the Uneven-Grip Pull-up

Uneven-grip pull-up.

Uneven-grip pull-up.

This is an excellent exercise for developing one-arm and lock-off strength. As the name implies, doing Uneven-Grip Pull-ups require a setup that offsets one hand 12 to 24 inches lower than the other. You can do this by simply looping a sling over a pull-up bar or extending one of a pair of free-floating rings or similar.

It’s best to learn the exercise with an opposing grip—do this by standing under the pull-up bar facing long ways with the high hand gripping the bar palms inward (thumb pointing backwards) and the low hand gripping the sling with a deep two-finger-pocket grip. From this bottom position initiate upward movement by pulling with both hands, however, focus on pulling hardest with the higher hand. As you ascend past mid-height, begin pushing downward with the low hand to aid the pulling of the high hand. Finish by pulling the bar down along the side of your head to achieve a tight lock-off position. Hold the top position for one second before beginning a controlled descent. Stop short of reaching a straight-armed position and immediately begin the next repetition. Do three to six reps, then dismount and rest for two minutes before doing three to six reps with the other hand gripping the bar.

Perform two or three sets on each side with the goal of three to six repetitions per set. Begin Uneven-Grip Pull-up training with your hands offset by just 12 inches; increase the displacement when you can do more than six reps. Advanced climbers can do this exercise with both hands in a palms-away grip position.

 


Copyright © 2015 Eric J. Hörst | All Rights Reserved.